ID # 25275307

John Deere F4365 High-Capacity Nutrient Applicator

Call for Price

F4365 High-Capacity Nutrient Applicator

  • 330 cu-ft (9.3 cu m) capacity dry box
  • 60- to 90-ft (18.3 m to 27.4 m) spread widths
  • CommandView™ III cab
  • Rugged chassis
  • Optional Air Boom, 300 cu. ft. capacity, 70-ft. boom
X Series in-cab technology
4600 CommandCenter™ display with SpreadStar™ system

Run screen
The F4365 is utilizing the 4600 CommandCenter display that is also found in large tractors today. The CommandARM™ controls, Generator 4 CommandCenter display and SpreadStar have been updated and tailored to the needs of operators allowing them to see all key functions on one run screen including AutoTrac™ assisted steering system, variable rate documentation, field totals, and dry spinner spreader settings. Click anywhere on the display to expand and easily adjust information.
X Series in-cab technologyWork setup

To prepare for field application, simply press the Setup button in the bottom left corner of the display run page, and it will direct the user to the Work Setup window.

  1. Select the Location box to setup user information including farm, field, and client. User information is not required to load and execute a variable-rate prescription.
  2. Select the Equipment box to do the initial setup of the machine including the number of bins in the dry spinner spreader.
  3. The Work Summary box shows a link for each bin in the dry spinner spreader. The screenshot above is for a two-bin dry box. Select each one to input or change the name of the product that will be applied. Twenty-four unique names can be entered into the display for various product types such as single product, blended product, or multi-product variable rate. The user can also choose the target rate for spreading or load a variable-rate prescription.
X Series in-cab technologySpreadStar
Once the Work Setup Window is complete, the updated SpreadStar application can then be used to input and setup the following:

X Series in-cab technologyTarget spread rate – selecting the target rate box allows the operator to quickly adjust three different target rates or load a prescription if needed. The target rates can be adjusted when spreading by using the corresponding buttons on the CommandARM.

Product density/product applied – selecting either of these areas will take the user to a bin details page where more frequent dry spinner spreader inputs and adjustments are made. For dry spinner spreaders with multiple bins, individual tab



s at the top of the screen make it easy to quickly toggle between them.

X Series in-cab technologyFeatures on the bin details page include:

  • Bin on/off
  • Bin chaining (not shown)
  • Product density
  • CFR value
  • Feed gate opening
  • Bin alarms
  • Resetting bin counter
  • Belt prime
  • Tarp control
  • Chain oiler
Automate tasks from filling station with Solution Command System

4 Series Sprayers are available with the SCS and have been completely redesigned to allow quick and easy operation at the load station for all operator skill levels. The optional system allows complete automation at the load station with a 12-button keypad. The features include the following:

  • Fill station light on/off
  • Pump on/off
  • Agitation
  • Pump speed increase
  • Pump speed decrease
  • Eductor on/off
  • Master on/off
  • Automated rinse cycle
  • Visual nozzle check
  • Pull-on fill
  • Push-on fill
  • Target fill

The system also features a micro-display, providing real-time feedback on the system operations, as well as ability to select a rinse method and the ability to monitor progress during the automated rinse function. Overall, the enhanced Solution Command System increases operational performance by increasing ease of use through automation at the load station.

X Series in-cab technologySuperior ride quality with dual c-channel chassis design
Dual c-channel chassis

The F4365 uses a dual c-channel frame design with leaf spring suspension to maximize ride quality and durability. The dual c-channel frame design is very strong, but it still allows the frame to flex. This is especially important when operating in rough field conditions at higher speeds because the frame will flex and absorb some of the impact loads instead of transferring it to the rest of the machine including the operator.

X Series in-cab technologyRear axle
Industry-proven AxleTech™ axles are used on the front and rear and are designed to haul full loads of heavier-density products such as lime.
Parabolic leaf springs are used on the front axle in conjunction with dampers and offer an industry-best 102 mm (4 in.) of travel. Parabolic leaf springs have fewer leaves, which reduce internal friction allowing for easier compression and articulation.

Dual-rate leaf springs are used on the rear axle to ensure consistent ride quality regardless of how much product is in the box. The first smaller set of leaf springs is used when the box is empty. When the box is loaded, the first set of leaf springs fully engages and combines with the second larger set of leaf springs. This design helps the F4365 drive and ride more consistently when applying in the field or in transport on the road.

The dual c-channel design, coupled with best-in-class suspension, helps absorb the impact loads and protects the operator and machine from harmful vibration. Reducing vibration improves productivity by reducing operator fatigue and decreasing the potential for failures caused by them.
X Series in-cab technologyFront axle leaf spring
X Series in-cab technologyRear axle leaf spring
X Series in-cab technologyStorage compartment
External storage compartment

An external storage compartment is located on the left-hand side of the machine and can be used to store important items nearby, but outside the cab:

  • Personal protective equipment (PPE), such as gloves, goggles, face shield, apron, and emergency clothing
  • Grease gun
  • Density check tool
  • Tools

X Series in-cab technologyHydraulic folding ladder
Operators will climb into the F4365 via a hydraulically controlled front ladder similar to 4 Series Sprayers. When the machine starts to move, the ladder will automatically fold up. When the machine stops, the operator simply hits the ladder button on the CommandARM™ control center to unfold it.
Cab and dry spinner spreader platforms
This industry-exclusive feature allows the operator to safely exit the cab and walk back to the dry spinner spreader to help with tendering or do a product density check.
X Series in-cab technologyCab platform
X Series in-cab technologySpreader platform
X Series in-cab technologyFront retrieval points
If the machine does get stuck while operating in wet conditions, retrieval points are located on the front of the frame to assist in pulling the machine out.
Fenders and mud flaps
Front and rear fenders protect the F4365 from mud and debris when operating in the field. Large front fenders similar to what are used on large row-crop tractors protect the front of the machine, even when turning. Rear mud flaps attached to the dry spinner spreader platforms on the right and left side provide excellent protection from debris thrown by the rear tires.
X Series in-cab technologyFront fender
X Series in-cab technologyRear mud flaps
Optimal weight distribution

F4365 High-Capacity Nutrient Applicator and bin configuration

Machine weight
kg (lb)

Front weight
kg (lb)

Rear weight
kg (lb)

Weight distribution (percent)



Base machine with Single-Bin DN495 (empty)

13,764 kg
(30,344 lb)

6,597 kg
(14,543 lb)

7,167 kg
(15,801 lb)

48 percent

52 percent

Base machine empty with Dual- Bin DN495 (MultApplier)

14,444 kg
(31,843 lb)

6,623 kg
(14,601 lb) 

7,821 kg
(17,242 lb)

46 percent

54 percent

Base machine empty with Four- Bin DN495 (MultiBin)

14,556 kg
(32,090 lb)

6,407 kg
(14,125 lb)

8,149 kg
(17,965 lb)

44 percent

56 percent

X Series in-cab technologyOperator-friendly cab, controls, and display
CommandView™ III cab features and enhancements
The F4365 High-Capacity Nutrient Applicator offers the same spacious CommandView III cab found in larger John Deere tractors and the 4 Series Self-Propelled Sprayers. This cab will keep operators comfortable all day long while providing great visibility and increasing productivity.

X Series in-cab technologyCommandARM™ controls
The CommandARM has been updated and tailored for the specific needs of an operator. The AutoTrac™ assisted steering system resume and Master on/off buttons, along with the boom raise/lower switches are located conveniently on the multifunction handle, so the operator does not have to move their hand during application and headland turns. Additional controls for lighting, heating ventilation air conditioning (HVAC), radio, dry spinner spreader, and more are located conveniently close by.
X Series in-cab technologyCommandARM storage
There are USB charging ports inside the storage compartment on the CommandARM armrest. These USB outlets are for charging only and do not connect to the radio or 4600 CommandCenter™ Display.
X Series in-cab technologyGeneration 4 CommandCenter display
The F4365 uses the Generation 4 CommandCenter display, similar to what is being used in larger tractors and sprayers today. SpreadStar™ system has also been updated to allow operators to see all key functions on one run screen including AutoTrac, John Deere Section Control, mapping, and application system settings. Importing and exporting user information and application data has been simplified and improved with Wireless Data Transfer, John Deere Operations Center, and AgLogic™ system.
X Series in-cab technologyMultifunction handle

The multifunction handle gives operators convenient access to important nutrient applicator controls.


Operations that are controlled from the handle include:

  • Raise/lower (fold/unfold) boom
  • Center boom raise/lower
  • Index boom section (IBS) control system
  • Speed range
  • Master system on/off
  • AutoTrac resume
  • Headland Management System (HMS)
  • Emergency off
  • Six reconfigurable buttons
Reconfigurable buttons

There are a total of nine reconfigurable buttons, six located on the multifunction handle and three on the CommandARM. Each button can be configured to one of the functions listed below:

  • Master on
  • Bin chaining
  • Left tilt up/down
  • Right tilt up/down
  • Run page cycle forward
  • Run page cycle back
  • Swap track
  • AutoTrac shift track center
  • AutoTrac shift track left
  • AutoTrac shift track right
  • Close overlay
X Series in-cab technologyReconfigurable buttons on multifunction handle
X Series in-cab technologySpeed range selector scroll wheel on multifunction handle
X Series in-cab technologyComfortCommand™ seat
The same great ComfortCommand seat in the 4 Series Sprayer is installed in the F4365 Nutrient Applicator. The seat provides superior ride quality with the ability to swivel 15 degrees to the right, improving operator comfort during application.

Additional cab features and options include a leather seat, Bluetooth® wireless system capability, a premium sound system, power mirrors, rear window tint, right-hand window wiper with fluid, and many more.

By keeping operators more comfortable during the day, the CommandView III cab will improve productivity while reducing the fatigue they experience throughout the day.

Bluetooth is a trademark of Bluetooth SIG Incorporated.

Improved machine performance equals more productivity
Engine and transmission
The F4365 uses an industry-proven 9-L PowerTech engine combined with an IVT to provide maximum power and efficiency.

The 9-L (549 cu in.) engine provides 272 kW (365 hp) rated horsepower and up to 298 kW (400 hp) peak horsepower when needed.

The IVT is common to the 8R Tractor Family, but has been modified for higher field and transport speeds.
X Series in-cab technology9-L PowerTech™ engine
X Series in-cab technologyInfinitely Variable Transmission (IVT™)
Applicator field and transport speeds
The F4365 can apply product up to 48 km/h (30 mph) in field and travel on the highway empty at speeds up to 74 km/h (46 mph). The engine and transmission are common to other product lines in John Deere which means service locations, service intervals, and parts are all common.
X Series in-cab technologyF4365 spreading in the field
X Series in-cab technologyF4365 in transport
X Series in-cab technologyFuel filling
To ensure the F4365 can run all day long, it comes equipped with a 567-L (150 gal.) fuel tank and 29.5-L (7.8 gal.) diesel exhaust fluid (DEF) tank located on the right side of the machine. The slender tank designs are attached to the dual c-channel frame, reducing the torque load the tanks can have on the frame when full. Both tanks can be easily filled from ground level.

More versatility with the DN495 Dry Spinner Spreader
New Leader® Dry Spinner Spreader

The F4365 uses an industry-proven New Leader Dry Spinner Spreader. This 4.27-m (14-ft) long dry box is capable of holding 9.34 m3 (330 ft³) of product and is available in multiple configurations to meet a variety of application needs. Depending on the product, spread widths can range from 18.29 to 27.43 m (60 to 90 ft).
X Series in-cab technologySingle bin option
The single bin option can be ordered in a 304 Stainless Steel or a 409 Painted Stainless Steel. A removable end gate, inverted V, and electric oiler come in base. At 24 km/h (15 mph), the single bin can spread fertilizer at rates as high as 499 kg (1100 lb) per acre or spread lime at rates as high as 2994 kg (6600 lb) per acre.
X Series in-cab technologyMultApplier insert
Two-bin MultApplier insert

A 2.1-m (7.0-ft) 304 Stainless-Steel MultApplier insert can be added to the single bin to spread two products at once. The MultApplier uses a belt over stainless-steel conveyor chain so no oil is necessary. Simply remove the end gate of the single bin to install the MultApplier insert.
X Series in-cab technologyMultiBin insert
Four-bin MultiBin insert

A 304 Stainless-Steel MultiBin insert can be added to the single bin to spread up to four products at once. In addition to the second large bin, two micronutrient bins are on the back of the MultiBin. Similar to the MultApplier insert, the MultiBin conveyor chain is belt over stainless-steel conveyor chain and does not require oil.

The divider separating the two micronutrient bins on the rear can also be removed to make one large micronutrient bin. Standard rate metering rollers come in base with the MultiBin insert. A pneumatically controlled lid covers the micronutrient bin(s) opening and is operated in the Generation 4 CommandCenter™ display.

New Leader is a trademark of Highway Equipment Company.


F4365 High-Capacity Nutrient Applicator
Sale Type
John Deere
Full-time two-wheel drive (2WD)
Dual c-channel frame
Final Tier 4 (FT4)
Power Bulge
298 kW 400 hp
9 L 584 cu in.
Air Boom - Type
AB485 Air Boom
Peak Rated Power
272 kW 365 hp
Fuel Tank Capacity
586 L 155 gal.
Air Boom - Capacity
8.49 m3 300 cu ft
Number Of Cylinders
Transport Speed Range
0 to 74 km/h 0 to 46 mph
Dry Spinner Spreader - Type
DN495 Dry Spinner Spreader
Air Boom - Spread Width Range
21.3 m 70 ft
Dry Spinner Spreader - Capacity
9.34 m3 330 cu ft
Diesel Exhaust Fluid (DEF) Tank Capacity
29.5 L 7.8 gal.
Spreading In Field Speed Range (dry Box)
0 to 48 km/h 0 to 30 mph
Dry Spinner Spreader - Spread Width Range
18.29 to 27.43 m 60 to 90 ft