John Deere 610 Integral Chisel Plow

Offers a variety of sizes and excellent residue flow

The 610 Chisel Plow is available in a variety of sizes to help match tractor horsepower and work designs.

*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton.

Strong mainframe withstands demanding field conditions

The 610 Chisel Plow features a large 102-mm x 102-mm (4-in. x 4-in.) tubular steel mainframe.

Welded construction adds the inner strength that withstands twisting and pulling through demanding field conditions.

Choice of rigid, TruPosition™, and Tru-Depth™ standards

The rigid standard:

• Is in base equipment on three-section models
• Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
• Design is suited for fields having few obstructions
• Will till to 203 mm (8 in.) deep
• Good clearance to handle heavy trash
  • 711-mm (28-in.) underframe
  • 305-mm (12-in.) spacing

The TruPosition standard:

• Is optional on all models
• Cast pivot assembly holds shank firm while working in the soil
• Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
• Shank is replaceable without disassembly of the standard assembly
• Trip action is suited for fields having rocks or other obstructions
  • 550-lb trip 711-mm (28-in.) standard will till to 203 mm (8 in.) deep
  • 711-mm (28-in.) underframe
  • 305-mm (12-in.) spacing
  • Trip height of 254 mm (10 in.) for good clearance
• Slotted lower hole to aid in removing ground-engaging tools

The Tru-Depth standard:

• Is optional on drawn rigid and select drawn flexible models up to 838 mm (33 ft)
• Is 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.); edge is bent for extra strength
• Designed to work in rocky ground and heavy draft conditions
  • Will till to 305 mm (12 in.) deep
  • Trip height of 279 mm (11 in.)
  • 568-kg (1250-lb) trip force
• Excellent clearance to handle heavy trash
  • 813-mm (32-in.) underframe
  • 305-mm (12-in.) spacing

Implement warning lights enable safe transport

An implement warning light harness with a turn-signal module for two amber and two red lights are included as standard equipment for safe transport on roads.

The implement warning light harness requires one of the following:

• Category 2, 3-point hitch with or without Quik-Coupler

• Category 3 and 3N, 3-point hitch with or without Quik-Coupler

HORSEPOWER REQUIREMENTS

The rigid and TruPosition™ standards require engine horsepower of 6 hp per ft to 10 hp per ft.

The Tru-Depth™ standard requires engine horsepower of 6 hp per ft to 14 hp per ft.

Operator's manual storage container comes as standard equipment

A 102-mm (4-in.) diameter container provides storage to give the operator easy access to the manual at the front of the machine. It is made out of a durable polyethylene and will keep the manual clean and dry in all weather conditions.

The container was designed exclusively for John Deere and the John Deere logo is shown on the lid.

Three-bar coil-tine harrow attachment available to finish off the field

A handy three-bar coil-tine harrow attachment fits compactly behind the chisel plow.

There is 305 mm (12 in.) of fore-aft clearance between the bars plus vertical clearance of 305 mm (12 in.).

NOTE:  Use the harrow attachment only on machines equipped with sweeps; do not use with the 
Tru-Depth™ standard.